Designed to attach to any pole with a max diameter of 2.4″ (62 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in. Requires Wedge Mount Kit that comes with Flat High Performance Starlink.
82ft / 25M Cable
(Flat High Performance)
£144 Ex Vat
The 25 m (82 ft) Starlink Cable is designed to replace the cable between the Flat High Performance Starlink and the Power Supply when additional length is needed.
98ft / 30M Ethernet Cable
(Flat High Performance)
£115 Ex Vat
The 30m (98 ft) Ethernet cable is designed to replace the standard 5m cable from the flat high performance cable when additional length is needed between the power supply and the RJ45 connector.
98ft / 30M Router
Cable (Flat High Performance)
£115 Ex Vat
The 30 m Router Cable is designed to replace the Standard 2 M cable when additional length is needed between the power supply and the Starlink Router.
Standard Starlink (V4)
147ft / 45m Cable
(Standard V4)
£134 Ex Vat
The 45 m (147 ft) Starlink Cable is designed to replace the cable between the Starlink and the Power Supply when additional length is needed.
Pipe Adaptor
(Standard V4)
£144 Ex Vat
Designed to attach to any existing pole with a minimum diameter of 31 mm (1.25 in) and a maximum diameter of 63.5 mm (2.5 in). This adaptable and sturdy mount allows seamless installation onto a variety of pole sizes. PIPE NOT INCLUDED.
Mobility Mount
(Standard V4)
£115 Ex Vat
The 30m (98 ft) Ethernet cable is designed to replace the standard 5m cable from the flat high performance cable when additional length is needed between the power supply and the RJ45 connector.
Standard Actuated (V3)
Ethernet Adaptor
(Standard Actuated V3)
£42.50 Ex Vat
The Starlink Ethernet Adapter is designed to connect a device directly to the Starlink router for a wired Internet connection. Supports up to 1 Gbps speeds. NOTE: This product is for indoor use only.
Long Wall Mount
(Standard Actuated V3)
£69 Ex Vat
Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required. Compatibility
75ft / 15M Cable
(Standard Actuated V3)
£83 Ex Vat
The 75ft cable is designed to replace the cable from the Standard Actuated Starlink when additional length is needed between your install location and the router.
150ft / 45M Cable
(Standard Actuated V3)
£104 Ex Vat
The 150ft cable is designed to replace the cable from the Standard Actuated Starlink when additional length is needed between your install location and the router.
Gen2 Mesh WIFI Router
£149 Ex Vat
Starlink Mesh WiFi Routers can be used either as a primary router or a mesh router to wirelessly extend your WiFi network throughout your home to provide a more reliable connection and faster speeds to areas where extra coverage may be needed.
